The memory operand might use one of the extended GPRs R8 through R15 and
hence require a REX prefix, but having a REX prefix makes the high-byte
register AH unencodeable as the src operand. This latent bug was exposed
by this branch, presumably because `select` now happens to be putting
something in an extended GPR instead of a legacy GPR.
In theory this could be fixed with minimal cost by introducing a way to
communicate to `select` that neither the destination memory nor the
other temporary can be in an extended GPR. However, I just went for the
simple solution which comes at a cost of one trivial instruction: copy
the remainder from AH to AL, and *then* copy AL to the destination.
`rep movsb` isn't usually a great idea here. This commit makes the logic
which tentatively existed in `genInlineMemcpy` apply in more cases, and
in particular applies it to the "new" backend logic. Put simply, all
copies of 128 bytes or fewer will now attempt this path first,
where---provided there is an SSE register and/or a general-purpose
register available---we will lower the operation using a sequence of 32,
16, 8, 4, 2, and 1 byte copy operations.
The feedback I got on this diff was "Push it to master and if it
miscomps I'll revert it" so don't blame me when it explodes
The big endian RISC-V effort is mostly driven by MIPS (the company) which is
pivoting to RISC-V, and presumably needs a big endian variant to fill the niche
that big endian MIPS (the ISA) did.
GCC already supports these targets, but LLVM support will only appear in 22;
this commit just adds the necessary target knowledge and checks on our end.
they seem to be always `null` even when accessed through extern key so we have no way to tell whether they have natural alignment or not to decorate. And the reason we don't always decorate them is because some environments might be too dumb and crash for this.
The LLVM backend lowers unions where all fields are zero-bit as
equivalent to their backing enum, and expects them to have the same
by-ref-ness in at least one place in the backend, probably more.
Resolves: #23577
This "get" is useless noise and was copied from FixedBufferWriter.
Since this API has not yet landed in a release, now is a good time
to make the breaking change to fix this.
This commit expands on the foundations laid by https://github.com/ziglang/zig/pull/23177
and moves even more `Sema`-only functionality from `Value`
to `Sema.arith`. Specifically all shift and bitwise operations,
`@truncate`, `@bitReverse` and `@byteSwap` have been moved and
adapted to the new rules around `undefined`.
Especially the comptime shift operations have been basically
rewritten, fixing many open issues in the process.
New rules applied to operators:
* `<<`, `@shlExact`, `@shlWithOverflow`, `>>`, `@shrExact`: compile error if any operand is undef
* `<<|`, `~`, `^`, `@truncate`, `@bitReverse`, `@byteSwap`: return undef if any operand is undef
* `&`, `|`: Return undef if both operands are undef, turn undef into actual `0xAA` bytes otherwise
Additionally this commit canonicalizes the representation of
aggregates with all-undefined members in the `InternPool` by
disallowing them and enforcing the usage of a single typed
`undef` value instead. This reduces the amount of edge cases
and fixes a bunch of bugs related to partially undefined vecs.
List of operations directly affected by this patch:
* `<<`, `<<|`, `@shlExact`, `@shlWithOverflow`
* `>>`, `@shrExact`
* `&`, `|`, `~`, `^` and their atomic rmw + reduce pendants
* `@truncate`, `@bitReverse`, `@byteSwap`
This commit replaces the "fuzzer" UI, previously accessed with the
`--fuzz` and `--port` flags, with a more interesting web UI which allows
more interactions with the Zig build system. Most notably, it allows
accessing the data emitted by a new "time report" system, which allows
users to see which parts of Zig programs take the longest to compile.
The option to expose the web UI is `--webui`. By default, it will listen
on `[::1]` on a random port, but any IPv6 or IPv4 address can be
specified with e.g. `--webui=[::1]:8000` or `--webui=127.0.0.1:8000`.
The options `--fuzz` and `--time-report` both imply `--webui` if not
given. Currently, `--webui` is incompatible with `--watch`; specifying
both will cause `zig build` to exit with a fatal error.
When the web UI is enabled, the build runner spawns the web server as
soon as the configure phase completes. The frontend code consists of one
HTML file, one JavaScript file, two CSS files, and a few Zig source
files which are built into a WASM blob on-demand -- this is all very
similar to the old fuzzer UI. Also inherited from the fuzzer UI is that
the build system communicates with web clients over a WebSocket
connection.
When the build finishes, if `--webui` was passed (i.e. if the web server
is running), the build runner does not terminate; it continues running
to serve web requests, allowing interactive control of the build system.
In the web interface is an overall "status" indicating whether a build
is currently running, and also a list of all steps in this build. There
are visual indicators (colors and spinners) for in-progress, succeeded,
and failed steps. There is a "Rebuild" button which will cause the build
system to reset the state of every step (note that this does not affect
caching) and evaluate the step graph again.
If `--time-report` is passed to `zig build`, a new section of the
interface becomes visible, which associates every build step with a
"time report". For most steps, this is just a simple "time taken" value.
However, for `Compile` steps, the compiler communicates with the build
system to provide it with much more interesting information: time taken
for various pipeline phases, with a per-declaration and per-file
breakdown, sorted by slowest declarations/files first. This feature is
still in its early stages: the data can be a little tricky to
understand, and there is no way to, for instance, sort by different
properties, or filter to certain files. However, it has already given us
some interesting statistics, and can be useful for spotting, for
instance, particularly complex and slow compile-time logic.
Additionally, if a compilation uses LLVM, its time report includes the
"LLVM pass timing" information, which was previously accessible with the
(now removed) `-ftime-report` compiler flag.
To make time reports more useful, ZIR and compilation caches are ignored
by the Zig compiler when they are enabled -- in other words, `Compile`
steps *always* run, even if their result should be cached. This means
that the flag can be used to analyze a project's compile time without
having to repeatedly clear cache directory, for instance. However, when
using `-fincremental`, updates other than the first will only show you
the statistics for what changed on that particular update. Notably, this
gives us a fairly nice way to see exactly which declarations were
re-analyzed by an incremental update.
If `--fuzz` is passed to `zig build`, another section of the web
interface becomes visible, this time exposing the fuzzer. This is quite
similar to the fuzzer UI this commit replaces, with only a few cosmetic
tweaks. The interface is closer than before to supporting multiple fuzz
steps at a time (in line with the overall strategy for this build UI,
the goal will be for all of the fuzz steps to be accessible in the same
interface), but still doesn't actually support it. The fuzzer UI looks
quite different under the hood: as a result, various bugs are fixed,
although other bugs remain. For instance, viewing the source code of any
file other than the root of the main module is completely broken (as on
master) due to some bogus file-to-module assignment logic in the fuzzer
UI.
Implementation notes:
* The `lib/build-web/` directory holds the client side of the web UI.
* The general server logic is in `std.Build.WebServer`.
* Fuzzing-specific logic is in `std.Build.Fuzz`.
* `std.Build.abi` is the new home of `std.Build.Fuzz.abi`, since it now
relates to the build system web UI in general.
* The build runner now has an **actual** general-purpose allocator,
because thanks to `--watch` and `--webui`, the process can be
arbitrarily long-lived. The gpa is `std.heap.DebugAllocator`, but the
arena remains backed by `std.heap.page_allocator` for efficiency. I
fixed several crashes caused by conflation of `gpa` and `arena` in the
build runner and `std.Build`, but there may still be some I have
missed.
* The I/O logic in `std.Build.WebServer` is pretty gnarly; there are a
*lot* of threads involved. I anticipate this situation improving
significantly once the `std.Io` interface (with concurrency support)
is introduced.
