LLVM backend: generate DIGlobalVariable's for non-function globals and
rename linkage names when exporting functions and globals.
zig_llvm.cpp: add some wrappers to convert a handful of DI classes
into DINode's since DIGlobalVariable is not a DIScope like the others.
zig_llvm.cpp: add some wrappers to allow replacing the LinkageName of
DISubprogram and DIGlobalVariable.
zig_llvm.cpp: fix DI class mixup causing nonsense reinterpret_cast.
The end result is that GDB is now usable since you now no longer need
to manually cast every global nor fully qualify every export.
Adds 2 new AIR instructions:
* dbg_var_ptr
* dbg_var_val
Sema no longer emits dbg_stmt AIR instructions when strip=true.
LLVM backend: fixed lowerPtrToVoid when calling ptrAlignment on
the element type is problematic.
LLVM backend: fixed alloca instructions improperly getting debug
location annotated, causing chaotic debug info behavior.
zig_llvm.cpp: fixed incorrect bindings for a function that should use
unsigned integers for line and column.
A bunch of C test cases regressed because the new dbg_var AIR
instructions caused their operands to be alive, exposing latent bugs.
Mostly it's just a problem that the C backend lowers mutable
and const slices to the same C type, so we need to represent that in the
C backend instead of printing two duplicate typedefs.
Previously, we did this so that we could insert a debug variable
declaration intrinsic on the alloca. But there is a dbg.value intrinsic
for declaring variables that are values.
* zig_clang is fully updated
* zig_llvm is fully updated
Some initial work on codegen.cpp is in place for upgrading to LLVM's
new opaque pointers. However there is much more to be done.
A few of zig llvm bindings for deprecated functions have been updated;
more need to be updated.
Comment from this commit reproduced here:
LLVM does not allow us to change the type of globals. So we must
create a new global with the correct type, copy all its attributes,
and then update all references to point to the new global,
delete the original, and rename the new one to the old one's name.
This is necessary because LLVM does not support const bitcasting
a struct with padding bytes, which is needed to lower a const union value
to LLVM, when a field other than the most-aligned is active. Instead,
we must lower to an unnamed struct, and pointer cast at usage sites
of the global. Such an unnamed struct is the cause of the global type
mismatch, because we don't have the LLVM type until the *value* is created,
whereas the global needs to be created based on the type alone, because
lowering the value may reference the global as a pointer.
Conflicts:
* cmake/Findclang.cmake
* cmake/Findlld.cmake
* cmake/Findllvm.cmake
In master branch, more search paths were added to these files with "12"
in the path. In this commit I updated them to "13".
* src/stage1/codegen.cpp
* src/zig_llvm.cpp
* src/zig_llvm.h
In master branch, ZigLLVMBuildCmpXchg is improved to add
`is_single_threaded`. However, the LLVM 13 C API has this already, and
in the llvm13 branch, ZigLLVMBuildCmpXchg is deleted in favor of the C
API. In this commit I updated stage2 to use the LLVM 13 C API rather
than depending on an improved ZigLLVMBuildCmpXchg.
Additionally, src/target.zig largestAtomicBits needed to be updated to
include the new m68k ISA.
* Implement Sema for `@cmpxchgWeak` and `@cmpxchgStrong`. Both runtime
and comptime codepaths are implement.
* Implement Codegen for LLVM backend and C backend.
* Add LazySrcLoc.node_offset_builtin_call_argX 3...5
* Sema: rework comptime control flow.
- `error.ComptimeReturn` is used to signal that a comptime function
call has returned a result (stored in the Inlining struct).
`analyzeCall` notices this and handles the result.
- The ZIR instructions `break_inline`, `block_inline`,
`condbr_inline` are now redundant and can be deleted. `break`,
`block`, and `condbr` function equivalently inside a comptime scope.
- The ZIR instructions `loop` and `repeat` also are modified to
directly perform comptime control flow inside a comptime scope,
skipping an unnecessary mechanism for analysis of runtime code.
This makes Zig perform closer to an interpreter when evaluating
comptime code.
* Sema: zirRetErrValue looks at Sema.ret_fn_ty rather than sema.func
for adding to the inferred error set. This fixes a bug for
inlined/comptime function calls.
* Implement ZIR printing for cmpxchg.
* stage1: make cmpxchg respect --single-threaded
- Our LLVM C++ API wrapper failed to expose this boolean flag before.
* Fix AIR printing for struct fields showing incorrect liveness data.
- adds 1 simple behavior tests for each
which does integer and vector ops at
runtime and comptime
- adds bigint_*_sat() methods for each
- use CreateIntrinsic() which accepts a
variable number of arguments to pass
the scale parameter
* update langref
- added case to test/compile_errors.zig given floats
- explain upstream bug in llvm.smul.fix.sat and link to #9643 in langref and commented out test cases
* sat-arithmetic: skip mul tests if arch == .wasm32 because ci is erroring with 'LLVM ERROR: Unable to expand fixed point multiplication' when compiling for wasm32
* Added doc comments for `std.Target.ObjectFormat` enum
* `std.Target.oFileExt` is removed because it is incorrect for Plan-9
targets. Instead, use `std.Target.ObjectFormat.fileExt` and pass a
CPU architecture.
* Added `Compilation.Directory.joinZ` for when a null byte is desired.
* Improvements to `Compilation.create` logic for computing `use_llvm`
and reporting errors in contradictory flags. `-femit-llvm-ir` and
`-femit-llvm-bc` will now imply `-fLLVM`.
* Fix compilation when passing `.bc` files on the command line.
* Improvements to the stage2 LLVM backend:
- cleaned up error messages and error reporting. Properly bubble up
some errors rather than dumping to stderr; others turn into panics.
- properly call ZigLLVMCreateTargetMachine and
ZigLLVMTargetMachineEmitToFile and implement calculation of the
respective parameters (cpu features, code model, abi name, lto,
tsan, etc).
- LLVM module verification only runs in debug builds of the compiler
- use LLVMDumpModule rather than printToString because in the case
that we incorrectly pass a null pointer to LLVM it may crash during
dumping the module and having it partially printed is helpful in
this case.
- support -femit-asm, -fno-emit-bin, -femit-llvm-ir, -femit-llvm-bc
- Support LLVM backend when used with Mach-O and WASM linkers.
LLVM time profiler can collect time traces and present them in a
hierarchical view. Which breakdowns the time spent in each Pass or even
IR unit. The result is also exported into a format that can be easily
visualized by the Chrome browser.
Currently this features is controlled by the following environment
variables:
- `ZIG_LLVM_TIME_TRACE_FILE` toggles this feature and specifies the
output time trace file.
- `ZIG_LLVM_TIME_TRACE_GRANULARITY` controls the time granularity in
ms (default to 500).
Use `PassBuilder::buildO0DefaultPipeline` to build pipeline for -O0
in replacement of `PassBuilder::buildPerModuleDefaultPipeline`. This
affects both normal and LTO settings.
Two redundant Passes - which were added by accident - were also removed
from LTO pipeline.
See #8418
This reverts commit ba1bea2fe87b73a53a3ecd729789853dcc56affe.
This reverts commit 94383d14df77fa638dac14f4b2bda5a2e3f21c5c.
This reverts commit 0d53a2bff01750f9220bcc861d662b2c5f304506.
- Enable MergeFunctionsPass in non-debug build.
- Verify input and output IR when the assertion is turned on.
- Add AlwaysInlinePass in debug build.
- Add more comments.
LLVM 12 requires sret attributes to have the struct type as a parameter,
and provides no C function for supplying it. Therefore, we must add
another C++ wrapper API for adding the sret attribute.
Fixes ability to build from source in the llvm12 branch.
Conflicts:
* src/clang.zig
* src/llvm.zig
- this file got moved to src/llvm/bindings.zig in master branch so I
had to put the new LLVM arch/os enum tags into it.
* lib/std/target.zig, src/stage1/target.cpp
- haiku had an inconsistency with its default target ABI, gnu vs
eabi. In this commit we make it gnu in both places to match the
latest changes by @hoanga.
* src/translate_c.zig
The CLI gains -flto and -fno-lto options to override the default.
However, the cool thing about this is that the defaults are great! In
general when you use build-exe in release mode, Zig will enable LTO if
it would work and it would help.
zig cc supports detecting and honoring the -flto and -fno-lto flags as
well. The linkWithLld functions are improved to all be the same with
regards to copying the artifact instead of trying to pass single objects
through LLD with -r. There is possibly a future improvement here as
well; see the respective TODOs.
stage1 is updated to support outputting LLVM bitcode instead of machine
code when lto is enabled. This allows LLVM to optimize across the Zig and
C/C++ code boundary.
closes#2845
Conflicts:
lib/std/dynamic_library.zig (fixed in this commit)
src/all_types.hpp
src/codegen.cpp
src/link.cpp
src/main.cpp
Will manually apply the diffs to these deleted files to the new zig
code in a followup commit.
Conflicts:
cmake/Findllvm.cmake
The llvm11 branch changed 10's to 11's and master branch added the
"using LLVM_CONFIG_EXE" help message, so the resolution was to merge
these changes together.
I also added a check to make sure LLVM is built with AVR enabled, which
is no longer an experimental target.
Before, this would cause a link failure when mixing Zig and C code for
RISC-V targets.
Now, the ABIs match and Zig and C code can be mixed successfully.
I will file a follow-up issue for the ability to deal more explicitly
with ABIs.
closes#4863
