Most calls to `requireRuntimeBlock` in Sema are not correct. This
function doesn't deal with all of them, but it does deal with ones which
have, in combination with the past few commits, introduced real-world
regressions.
Related: #22353
This fixes a bug which exposed a compiler implementation detail (ZIR
alloc elision). Previously, `const` declarations with a runtime-known
value in a comptime scope were permitted only if AstGen was able to
elide the alloc in ZIR, since the error was reported by storing to the
comptime alloc.
This just adds a new instruction to also emit this error when the alloc
is elided.
To avoid this PR regressing error messages, most of the work here has
gone towards improving error notes for why code was comptime-evaluated.
ZIR `block_comptime` now stores a "comptime reason", the enum for which
is also used by Sema. There are two types in Sema:
* `ComptimeReason` represents the reason we started evaluating something
at comptime.
* `BlockComptimeReason` represents the reason a given block is evaluated
at comptime; it's either a `ComptimeReason` with an attached source
location, or it's because we're in a function which was called at
comptime (and that function's `Block` should be consulted for the
"parent" reason).
Every `Block` stores a `?BlockComptimeReason`. The old `is_comptime`
field is replaced with a trivial `isComptime()` method which returns
whether that reason is non-`null`.
Lastly, the handling for `block_comptime` has been simplified. It was
previously going through an unnecessary runtime-handling path; now, it
is a trivial sub block exited through a `break_inline` instruction.
Resolves: #22296
The `.empty` map in a shard is weird: it claims to have capacity 1, but
you're not actually allowed to actually use that capacity. That's fine
for the normal insertion algorithm, because it always resizes to a
higher capacity when inserting the initial element. However,
`rehashTrackedInsts` was not aware of this caveat, so sometimes tried to
store to the single element of the `empty` map.
This system exists to avoid an extra branch in the main resizing logic
(since `new_cap = old_cap * 2` only works if the capacity is never
non-zero). However, it's fine for `rehashTrackedInsts` to have an extra
branch to handle this case, since it's literally called once per update.
This commit separates semantic analysis of the annotated type vs value
of a global declaration, therefore allowing recursive and mutually
recursive values to be declared.
Every `Nav` which undergoes analysis now has *two* corresponding
`AnalUnit`s: `.{ .nav_val = n }` and `.{ .nav_ty = n }`. The `nav_val`
unit is responsible for *fully resolving* the `Nav`: determining its
value, linksection, addrspace, etc. The `nav_ty` unit, on the other
hand, resolves only the information necessary to construct a *pointer*
to the `Nav`: its type, addrspace, etc. (It does also analyze its
linksection, but that could be moved to `nav_val` I think; it doesn't
make any difference).
Analyzing a `nav_ty` for a declaration with no type annotation will just
mark a dependency on the `nav_val`, analyze it, and finish. Conversely,
analyzing a `nav_val` for a declaration *with* a type annotation will
first mark a dependency on the `nav_ty` and analyze it, using this as
the result type when evaluating the value body.
The `nav_val` and `nav_ty` units always have references to one another:
so, if a `Nav`'s type is referenced, its value implicitly is too, and
vice versa. However, these dependencies are trivial, so, to save memory,
are only known implicitly by logic in `resolveReferences`.
In general, analyzing ZIR `decl_val` will only analyze `nav_ty` of the
corresponding `Nav`. There are two exceptions to this. If the
declaration is an `extern` declaration, then we immediately ensure the
`Nav` value is resolved (which doesn't actually require any more
analysis, since such a declaration has no value body anyway).
Additionally, if the resolved type has type tag `.@"fn"`, we again
immediately resolve the `Nav` value. The latter restriction is in place
for two reasons:
* Functions are special, in that their externs are allowed to trivially
alias; i.e. with a declaration `extern fn foo(...)`, you can write
`const bar = foo;`. This is not allowed for non-function externs, and
it means that function types are the only place where it is possible
for a declaration `Nav` to have a `.@"extern"` value without actually
being declared `extern`. We need to identify this situation
immediately so that the `decl_ref` can create a pointer to the *real*
extern `Nav`, not this alias.
* In certain situations, such as taking a pointer to a `Nav`, Sema needs
to queue analysis of a runtime function if the value is a function. To
do this, the function value needs to be known, so we need to resolve
the value immediately upon `&foo` where `foo` is a function.
This restriction is simple to codify into the eventual language
specification, and doesn't limit the utility of this feature in
practice.
A consequence of this commit is that codegen and linking logic needs to
be more careful when looking at `Nav`s. In general:
* When `updateNav` or `updateFunc` is called, it is safe to assume that
the `Nav` being updated (the owner `Nav` for `updateFunc`) is fully
resolved.
* Any `Nav` whose value is/will be an `@"extern"` or a function is fully
resolved; see `Nav.getExtern` for a helper for a common case here.
* Any other `Nav` may only have its type resolved.
This didn't seem to be too tricky to satisfy in any of the existing
codegen/linker backends.
Resolves: #131
The `Cau` abstraction originated from noting that one of the two primary
roles of the legacy `Decl` type was to be the subject of comptime
semantic analysis. However, the data stored in `Cau` has always had some
level of redundancy. While preparing for #131, I went to remove that
redundany, and realised that `Cau` now had exactly one field: `owner`.
This led me to conclude that `Cau` is, in fact, an unnecessary level of
abstraction over what are in reality *fundamentally different* kinds of
analysis unit (`AnalUnit`). Types, `Nav` vals, and `comptime`
declarations are all analyzed in different ways, and trying to treat
them as the same thing is counterproductive!
So, these 3 cases are now different alternatives in `AnalUnit`. To avoid
stealing bits from `InternPool`-based IDs, which are already a little
starved for bits due to the sharding datastructures, `AnalUnit` is
expanded to 64 bits (30 of which are currently unused). This doesn't
impact memory usage too much by default, because we don't store
`AnalUnit`s all too often; however, we do store them a lot under
`-fincremental`, so a non-trivial bump to peak RSS can be observed
there. This will be improved in the future when I made
`InternPool.DepEntry` less memory-inefficient.
`Zcu.PerThread.ensureCauAnalyzed` is split into 3 functions, for each of
the 3 new types of `AnalUnit`. The new logic is much easier to
understand, because it avoids conflating the logic of these
fundamentally different cases.
The new representation is often more compact. It is also more
straightforward to understand: for instance, `extern` is represented on
the `declaration` instruction itself rather than using a special
instruction. The same applies to `var`, making both of these far more
compact.
This commit also separates the type and value bodies of a `declaration`
instruction. This is a prerequisite for #131.
In general, `declaration` now directly encodes details of the syntax
form used, and the embedded ZIR bodies are for actual expressions. The
only exception to this is functions, where ZIR is effectively designed
as if we had #1717. `extern fn` declarations are modeled as
`extern const` with a function type, and normal `fn` definitions are
modeled as `const` with a `func{,_fancy,_inferred}` instruction. This
may change in the future, but improving on this was out of scope for
this commit.
This includes function aliases, but not function declarations.
Also, re-introduce a target check for function alignment which was
inadvertently removed in the prior commit.
Previously, if multiple navs owned the same type due to being the same
zir node and having the same captures, they would overwrite each other.
Now, the navs codegenned later emit a decl alias to the first one.
Currently, `zig ast-check` fails on ZON files, because it tries to
interpret the file as Zig source code. This commit introduces a new
verification pass, `std.zig.ZonGen`, which applies to an AST in ZON
mode.
Like `AstGen`, this pass also converts the AST into a more helpful
format. Rather than a sequence of instructions like `Zir`, the output
format of `ZonGen` is a new datastructure called `Zoir`. This type is
essentially a simpler form of AST, containing only the information
required for consumers of ZON. It is also far more compact than
`std.zig.Ast`, with the size generally being comparable to the size of
the well-formatted source file.
The emitted `Zoir` is currently not used aside from the `-t` option to
`ast-check` which causes it to be dumped to stdout. However, in future,
it can be used for comptime `@import` of ZON files, as well as for
simpler handling of files like `build.zig.zon`, and even by other parts
of the Zig Standard Library.
Resolves: #22078
The previous commit exposed some missing `const` qualifiers in a few
places. These mutable slices could have been used to store invalid
values into memory!
The error messages here aren't amazing yet, but this is an improvement
on status quo, because the current behavior allows false negative
compile errors, so effectively miscompiles.
Resolves: #15874
This code was left over from the legacy Autodoc implementation. No
component of the compiler pipeline actually requires doc comments, so it
is a waste of time and space to store them in ZIR.
The goal of this commit is to get rid of some "unused command line argument"
warnings that Clang would give for various file types previously. This cleanup
also has the side effect of making the order of flags more understandable,
especially as it pertains to include paths.
Since a lot of code was shuffled around in this commit, I recommend reviewing
the old and new versions of the function side-by-side rather than trying to make
sense of the diff.
