Functions like isMinGW() and isGnuLibC() have a good reason to exist: They look
at multiple components of the target. But functions like isWasm(), isDarwin(),
isGnu(), etc only exist to save 4-8 characters. I don't think this is a good
enough reason to keep them, especially given that:
* It's not immediately obvious to a reader whether target.isDarwin() means the
same thing as target.os.tag.isDarwin() precisely because isMinGW() and similar
functions *do* look at multiple components.
* It's not clear where we would draw the line. The logical conclusion before
this commit would be to also wrap Arch.isX86(), Os.Tag.isSolarish(),
Abi.isOpenHarmony(), etc... this obviously quickly gets out of hand.
* It's nice to just have a single correct way of doing something.
`std.Build.Step.Run` makes the very reasonable assumption that
`error.InvalidExe` will be reported on `spawn` if it will happen.
However, this property does not currently hold on POSIX targets. This
is, through a slightly convoluted series of events, partially
responsible for the sporadic `BrokenPipe` errors we've been seeing more
and more in CI runs.
Making `spawn` wait for the child to exec in the POSIX path introduces
a block of up to 400us. So, instead of doing that, we add a new API for
this particular case: `waitForSpawn`. This function is a nop on Windows,
but on POSIX it blocks until the child successfully (or otherwise) calls
`execvpe`, and reports the error if necessary. `std.Build.Step.Run`
calls this function, so that it can get `error.InvalidExe` when it wants
it.
I'm not convinced that this API is optimal. However, I think this entire
API needs to be either heavily refactored or straight-up redesigned
(related: #22504), so I'm not too worried about hitting the perfect API:
I'd rather just fix this bug for now, and figure out the long-term goal
a bit later.
The previous logic here was trying to assume that custom test runners
never used `std.zig.Server` to communicate with the build runner;
however, it was flawed, because modifying the `test_runner` field on
`Step.Compile` would not update this flag. That might have been
intentional (allowing a way for the user to specify a custom test runner
which *does* use the compiler server protocol), but if so, it was a
flawed API, since it was too easy to update one field without updating
the other.
Instead, bundle these two pieces of state into a new type
`std.Build.Step.Compile.TestRunner`. When passing a custom test runner,
you are now *provided* to specify whether it is a "simple" runner, or
whether it uses the compiler server protocol.
This is a breaking change, but is unlikely to affect many people, since
custom test runners are seldom used in the wild.
This was done by regex substitution with `sed`. I then manually went
over the entire diff and fixed any incorrect changes.
This diff also changes a lot of `callconv(.C)` to `callconv(.c)`, since
my regex happened to also trigger here. I opted to leave these changes
in, since they *are* a correct migration, even if they're not the one I
was trying to do!
The goals of this branch are to:
* compile faster when using the wasm linker and backend
* enable saving compiler state by directly copying in-memory linker
state to disk.
* more efficient compiler memory utilization
* introduce integer type safety to wasm linker code
* generate better WebAssembly code
* fully participate in incremental compilation
* do as much work as possible outside of flush(), while continuing to do
linker garbage collection.
* avoid unnecessary heap allocations
* avoid unnecessary indirect function calls
In order to accomplish this goals, this removes the ZigObject
abstraction, as well as Symbol and Atom. These abstractions resulted
in overly generic code, doing unnecessary work, and needless
complications that simply go away by creating a better in-memory data
model and emitting more things lazily.
For example, this makes wasm codegen emit MIR which is then lowered to
wasm code during linking, with optimal function indexes etc, or
relocations are emitted if outputting an object. Previously, this would
always emit relocations, which are fully unnecessary when emitting an
executable, and required all function calls to use the maximum size LEB
encoding.
This branch introduces the concept of the "prelink" phase which occurs
after all object files have been parsed, but before any Zcu updates are
sent to the linker. This allows the linker to fully parse all objects
into a compact memory model, which is guaranteed to be complete when Zcu
code is generated.
This commit is not a complete implementation of all these goals; it is
not even passing semantic analysis.
This commit amends `std.Build.ExecutableOptions` etc to have a new
field, `root_module`, which allows artifacts to be created whose root
module is an existing `*Module` rather than a freshly constructed one.
This API can be far more versatile, allowing construction of complex
module graphs before creating any compile steps, and therefore also
allowing easy reuse of modules.
The fields which correspond to module options, such as
`root_source_file`, are all considered deprecated. They may not be
populated at the same time as the `root_module` field. In the next
release cycle, these deprecated fields will be removed, and the
`root_module` field made non-optional.
At the expense of a slight special case in the build runner, we can make
the handling of dependencies between modules a little shorter and much
easier to follow.
When module and step graphs are being constructed during the "configure"
phase, we do not set up step dependencies triggered by modules. Instead,
after the configure phase, the build runner traverses the whole
step/module graph, starting from the root top-level steps, and
configures all step dependencies implied by modules. The "make" phase
then proceeds as normal. Also, the old `Module.dependencyIterator` logic
is replaced by two separate iterables. `Module.getGraph` takes the root
module of a compilation, and returns all modules in its graph; while
`Step.Compile.getCompileDependencies` takes a `*Step.Compile` and
returns all `*Step.Compile` it depends on, recursively, possibly
excluding dynamic libraries. The old `Module.dependencyIterator`
combined these two functions into one unintuitive iterator; they are now
separated, which in particular helps readability at the usage sites
which only need one or the other.
This commit changes the `root_module` field of `std.Build.Step.Compile`
to be a `*Module` rather than a `Module`. This is a breaking change, but
an incredibly minor one (the full potential extent of the breakage can
be seen in the modified standalone test).
This change will be necessary for an upcoming improvement, so it was
convenient to make it here.
We have deduced that it seems the sporadic BrokenPipe failures happening
on the CI runners (e.g.
https://github.com/ziglang/zig/actions/runs/12035916948/job/33555963190)
are likely caused by the test runner's stdin pipe abnormally closing,
likely due to the process crashing. Here, we introduce error handling
for this case, so that if these writes fail, the step is marked as
failed correctly, and we still collect the child's stderr to report.
This won't fix the CI issues, but it should promote them to proper error
messages including child stderr, which -- at least in theory -- should
allow us to ultimately track down where the errors come from.
Note that this change is desirable regardless of bugs in the test runner
or similar, since the child process could terminate abnormally for any
number of reasons (e.g. a crashing test), and such cases should be
correctly reported by the build runner.
When using Build.Step.Run.captureStdOut with a program that prints more
than 10 megabytes of output, the build process hangs.
This is because evalGeneric returns an error without reading child's
stdin till the end, so we subsequently get stuck in `try child.wait()`.
To fix this, make sure to kill the child in case of an error!
Output before this change:
λ ./zig/zig build -Dmultiversion=0.15.6 -Dconfig-release=0.15.7 -Dconfig-release-client-min=0.15.6
[3/8] steps
└─ run gh
^C
λ # an hour of debugging
Output after this change:
λ ./zig/zig build -Dmultiversion=0.15.6 -Dconfig-release=0.15.7 -Dconfig-release-client-min=0.15.6
install
└─ install generated to ../tigerbeetle
└─ run build_mutliversion (tigerbeetle)
└─ run unzip
└─ run gh failure
error: unable to spawn gh: StdoutStreamTooLong
Build Summary: 3/8 steps succeeded; 1 failed (disable with --summary none)
install transitive failure
└─ install generated to ../tigerbeetle transitive failure
└─ run build_mutliversion (tigerbeetle) transitive failure
└─ run unzip transitive failure
└─ run gh failure
error: the following build command failed with exit code 1:
/home/matklad/p/tb/work/.zig-cache/o/c0e3f5e66ff441cd16f9a1a7e1401494/build /home/matklad/p/tb/work/zig/zig /home/matklad/p/tb/work /home/matklad/p/tb/work/.zig-cache /home/matklad/.cache/zig --seed 0xc1d4efc8 -Zaecc61299ff08765 -Dmultiversion=0.15.6 -Dconfig-release=0.15.7 -Dconfig-release-client-min=0.15.6
The compiler defaults this value to off so that users whose system
shared libraries are all ELF files don't have to pay the cost of
checking every file to find out if it is a text file instead.
When a GNU ld script is encountered, the error message instructs users
about the CLI flag that will immediately solve their problem.
These are really answering questions about the Zig compiler's capacity to
provide a libc/libc++ implementation. As such, std.zig.target seems like a more
fitting place for these.
The compiler actually doesn't need any functional changes for this: Sema
does reification based on the tag indices of `std.builtin.Type` already!
So, no zig1.wasm update is necessary.
This change is necessary to disallow name clashes between fields and
decls on a type, which is a prerequisite of #9938.
A compilation build step for which the binary is not required could not
be compiled previously. There were 2 issues that caused this:
- The compiler communicated only the results of the emitted binary and
did not properly communicate the result if the binary was not emitted.
This is fixed by communicating the final hash of the artifact path (the
hash of the corresponding /o/<hash> directory) and communicating this
instead of the entire path. This changes the zig build --listen protocol
to communicate hashes instead of paths, and emit_bin_path is accordingly
renamed to emit_digest.
- There was an error related to the default llvm object path when
CacheUse.Whole was selected. I'm not really sure why this didn't manifest
when the binary is also emitted.
This was fixed by improving the path handling related to flush() and
emitLlvmObject().
In general, this commit also improves some of the path handling throughout
the compiler and standard library.
* libfuzzer: close file after mmap
* fuzzer/main.js: connect with EventSource and debug dump the messages.
currently this prints how many fuzzer runs have been attempted to
console.log.
* extract some `std.debug.Info` logic into `std.debug.Coverage`.
Prepares for consolidation across multiple different executables which
share source files, and makes it possible to send all the
PC/SourceLocation mapping data with 4 memcpy'd arrays.
* std.Build.Fuzz:
- spawn a thread to watch the message queue and signal event
subscribers.
- track coverage map data
- respond to /events URL with EventSource messages on a timer
* new .zig-cache subdirectory: 'v'
- stores coverage information with filename of hash of PCs that want
coverage. This hash is a hex encoding of the 64-bit coverage ID.
* build runner
* fixed bug in file system inputs when a compile step has an
overridden zig_lib_dir field set.
* set some std lib options optimized for the build runner
- no side channel mitigations
- no Transport Layer Security
- no crypto fork safety
* add a --port CLI arg for choosing the port the fuzzing web interface
listens on. it defaults to choosing a random open port.
* introduce a web server, and serve a basic single page application
- shares wasm code with autodocs
- assets are created live on request, for convenient development
experience. main.wasm is properly cached if nothing changes.
- sources.tar comes from file system inputs (introduced with the
`--watch` feature)
* receives coverage ID from test runner and sends it on a thread-safe
queue to the WebServer.
* test runner
- takes a zig cache directory argument now, for where to put coverage
information.
- sends coverage ID to parent process
* fuzzer
- puts its logs (in debug mode) in .zig-cache/tmp/libfuzzer.log
- computes coverage_id and makes it available with
`fuzzer_coverage_id` exported function.
- the memory-mapped coverage file is now namespaced by the coverage id
in hex encoding, in `.zig-cache/v`
* tokenizer
- add a fuzz test to check that several properties are upheld
Deprecates std.fs.atomicSymLink and removes the allocator requirement
from the new std.fs.Dir.atomicSymLink. Replaces the two usages of this
within std.
I did not include the TODOs from the original code that were based
off of `switch (err) { ..., else => return err }` not having correct
inference that cases handled in `...` are impossible in the error
union return type because these are not specified in many places but
I can add them back if wanted.
Thank you @squeek502 for help with fixing buffer overflows!
The flag makes compiler_rt and libfuzzer be in debug mode.
Also:
* fuzzer: override debug logs and disable debug logs for frequently
called functions
* std.Build.Fuzz: fix bug of rerunning the old unit test binary
* report errors from rebuilding the unit tests better
* link.Elf: additionally add tsan lib and fuzzer lib to the hash
This flag makes the build runner rebuild unit tests after the pipeline
finishes, if it finds any unit tests.
I did not make this integrate with file system watching yet.
The test runner is updated to detect which tests are fuzz tests.
Run step is updated to track which test indexes are fuzz tests.
* Add -f(no-)sanitize-coverage-trace-pc-guard CLI flag which defaults to
off. This value lowers to TracePCGuard = true (LLVM backend) and -Xclang
-fsanitize-coverage-trace-pc-guard. These settings are not
automatically included with -ffuzz.
* Add `Build.Step.Compile` flag for sanitize_coverage_trace_pc_guard
with appropriate documentation.
* Add `zig cc` integration for the respective flags.
* Avoid crashing in ELF linker code when -ffuzz -femit-llvm-ir used
together.
`PKG_CONFIG` environment variable is used to override path to
pkg-config executable, for example when it's name is prepended by
target triple for cross-compilation purposes:
```
PKG_CONFIG=/usr/bin/aarch64-unknown-linux-gnu-pkgconf zig build
```
Signed-off-by: Eric Joldasov <bratishkaerik@landless-city.net>
